KFC-PS3017W
PS-series 30cm subwoofer
Pagrindinės savybės
300mm polipropileno difuzorius (PP difuzorius) |
400W nominali/RMS įėjimo galia |
High-ridged Two-piece Diaphragm for solid bass |
X-motif cap Technology for resonance control |
Single, multi-layered, voice coil. |
Aluminum bobbin for better thermal conductivity |
Airflow control for optimal heat radition |
Stress controlled spider |
Push-terminals for easy connection |
Uždaro / ventiliuojamo instaliavimo galimybė |
Garsiakalbių savybės
Garsiakalbių dydis | 300mm |
Padidinto dydžio išmatavimai | Taip |
Garsiakalbio difuzorius | Deimantinio tipo paviršius |
Magneto tipas | Feritinis |
Voice-coil | single, multi-layer voice coil |
Jungtys | Push Type |
Spider | Stress controlled spider |
Bottom-Yoke | Fully closed bottom yoke |
Heat dissipation technology | Airflow control |
Instaliavimo galimybės | Uždaras / ventiliuojamas |
Žemų/vidutinių garsiakalbių specifikacija
Trumpalaikė įėjimo galia | 2000W |
Nominali įėjimo galia | 400W |
Garsiakalbio difuzoriaus medžiaga | Polipropileno (PP) difuzorius |
Center Cap Type | x-motif cap |
Pakabos tipas | Stress controlled Spider |
Garsiakalbio korpusas | Plienas |
Garsiakalbio apvadas | Foam |
Jautrumas | 85dB/W/m |
Dažnių atsakas | 29Hz ~ 300Hz |
Garsiakalbių varža | 4Ω |
Išmatavimai (P x A x G) | 326 x 326 x 155,4mm |
Montavimo skersmuo Ø | 280mm |
Montavimo gylis | 137mm |
Garsiakalbio svoris | 4200gr |
Žemų dažnių garsiakalbis parametrai
Nominali varža (Z) | 4Ω |
DC atsparumas (Re) | 3.7Ω |
Rezonansinis dažnis (FSO) | 24,4Hz |
Mechaninis Q faktorius (QMS) | 6,79 |
Elektros Q faktorius (QES) | 0,52 |
Bendras Q faktorius (QTS) | 0,483 |
Ritės induktyvumas (LBM) | 2,04mH |
Ritės diametras (d) | 50mm |
Jėgos faktorius (BL) | 12,9T/m |
Peak excursion Xmax | 5,9mm |
Judinti masė (MMS) | 152gr. |
Garso akustikos atitikimas (VAS) | 104 litrų |
Stūmoklių Plotas (SD) | 0,0512m² |
Poslinkis | 1,2cc |
Sandarios dėžės tūris | 35,4 litrų |
Sandarios dėžės išmatavimai | 457 x 362 x 299mm ( 18mm storio MDF)(PxAxG) |
Ventiliuojamos dėžės tūris | 42,5 litrų |
Ventiliuojamos dėžės išmatavimai | 590 x 362 x 394mm ( 18mm storio MDF)(PxAxG) |
Port dimensions (labyrinth) (W x H x L) | 35 x 324 x 736mm |
-
-
X-Motif Cap & Diamon array cone
-
The X-motif cap, made of Injection-Molded Polipropylene, controls resonance frequency and cut away unnecessary high frequency sound to deliver powerfull, solid bass. Diamond shapes are etched all the way to the speaker edge, helping to reduce surface waves on the speaker diaphragm, decrease vibration, and suppress distortion. The diamond array pattern also provides additional rigidity to the speaker to improve voice coil response for dynamic and clean audio reproduction.
-
-
-
Heat-Resistant Aluminum Voice Coil Bobbin.
-
Most common subwoofer failure factor is Voice Coil Burnout. By using heat-resistant aluminum voice-coil bobbin with higher thermal conductivity, heat is easily transferred to the iron parts. This will Increase durability of the voice coil.
-
-
-
Newly-Designed Airflow Control
-
The air is pushed by the cap, the voice-coil is cooled when air passes through the gap.
-
-
-
Closed Yoke Design
-
The closed yoke realizes larger magnetic circuit to increase heat radiation, the more metal the better the heat radiation.
-
-
-
Computer-Optimized Spider
-
Redesigned shape to equalize the stress to increase mechanical durability.
-